Hyperion Become a partner
Support

Help with your Hyperion supplies.

Read your label, install with confidence, fix common print problems, and get warranty help from your provider.

Read your label

Every box tells you what’s inside.

The label on the front right-hand corner of the box tells you exactly what’s inside and what it fits.

  1. Color bar.The cartridge color at a glance: black, cyan, magenta, or yellow.
  2. Replacement for.The original cartridge number this supply replaces.
  3. Hyperion part number.The number to give your provider when you reorder.
  4. Color and yield.The page yield as rated for that specific part.
  5. Compatible models.The printers and devices the supply is made for.
  6. End panel and barcode.The part number and color repeat on the end of the box, so it reads and scans right from the shelf.
Before you install

Six habits for a clean first page.

1
Keep it sealed until you’re readyStore boxes flat, at room temperature, and out of direct sunlight.
2
Let a cold box warm upIf it’s been in a cold vehicle or warehouse, give it an hour at room temperature first.
3
Rock toner gentlyTilt a toner cartridge side to side five or six times to spread the toner evenly.
4
Remove every sealPull all tape, clips, and protective covers, including any pull tab on the side.
5
Don’t touch the drumThe colored roller is sensitive to light and fingerprints, so hold the cartridge by its body.
6
Print a few test pagesThe first sheets after a swap can show light specks that clear on their own.
Print problems

Quick fixes for common issues.

Still stuck? Contact your provider with your part number and printer model.

Prints look light or faded
  • Turn off toner-saver or economy mode in your printer settings.
  • Remove the cartridge, rock it gently side to side, and reinstall it.
  • Check that the paper type setting matches the paper you’ve loaded.
Streaks, lines, or repeating marks
  • Clean the printer’s corona wire or transfer area as your printer’s manual describes.
  • Marks that repeat at the same spacing usually point to the drum or the fuser.
  • If the marks stay with a fresh cartridge, contact support with a sample print.
The printer doesn’t recognize the cartridge
  • Remove the cartridge and reseat it firmly until it clicks into place.
  • Turn the printer off for 30 seconds, then turn it back on.
  • If the printer installed a firmware update recently, contact support with your part number and printer model.
Toner smears or rubs off the page
  • Make sure the paper weight and type settings match the paper you’re using.
  • Try paper from a fresh, dry ream.
  • If smearing continues, the printer’s fuser may need service from your provider.
A new cartridge shows a low-toner warning
  • Many printers estimate toner levels, so keep printing until quality fades.
  • If your printer offers a supply counter reset, run it after installing the new cartridge.
1Year guarantee
Warranty

Guaranteed to perform.

Every Hyperion supply is warranted against defects in manufacturing, design, and engineering for one year from the date of purchase. If one fails, your provider will replace it or refund it.

To make a claim, contact the provider you bought it from with the part number from the label, a short description of the problem, and a sample print if you have one. Your provider handles the return from there.

Your device is protected. If a Hyperion supply damages your printer, MFP, fax machine, label printer, or other device, Hyperion pays to repair it, parts and labor included.

Your printer warranty stays intact. In the United States, a manufacturer can’t void your printer’s warranty simply because you used a compatible supply.

Read the full warranty
Get help

Your provider is your first call.

The provider who sold you Hyperion handles reorders, returns, and warranty claims, and knows the printers in your office. Before you call, have these ready:

  • The Hyperion part numberFrom the label on the box or the cartridge.
  • Your printer’s make and modelUsually on the front panel or a label on the back.
  • A sample printIf the problem shows on the page, it helps diagnose it fast.
No provider yet?

We’ll introduce you to one near you.

Tell us where you are and what you print, and an authorized Hyperion provider will be in touch.